CAR LIFT

€64.80
Tax included
7234001

Ceramic treatments for SIO2-based bodywork.

Volume
Quantity

CHARACTERISTIQUES

Ceramic treatments for SIO2- based bodywork

The Car Lift range has been made to offer to the user all the know-how of Fictech in terms of technology with the aim of offering products that are easy to install with a spectacular and very durable result.

Car Lift classic is the first ceramic of the range. By opting for Car Lift Classic, you choose a very long-lasting protection (about 24h months) for your varnish to protect your car form oxydation, from inlay of various contaminants (road veil, bird dropping, midges etc...) while guaranteeing you an unparalleled future ease of maintenance with other types of treatments.

The gloss left by Car Lift Classic is amazing.

It will always be possible (and we recommend) to apply 2 layers of Car Lift Classic on your varnish for more protection and shine.

A ceramic protection of this quality will require a careful preparation of the support (pre-washing, washing, decontamination, polishing and especially degreasing).

Careful wiping in a well-lit room will be required to avoid any residual trace that would be difficult to make up once the treatment has dried. 

Car lift Classic requires some precautions of use but you will ensure the best of the existing protections (ceramic), with a great ease of maintenance. 
Can be applied to all varnished parts of the vehicle (body, varnished plastics, rims).

Car Lift Classic is recommended for the application on matte vehicles. 

Ceramic treatment base SIO2 and TIO2.

Protection 25 000 km/ 24 months

Hydrophobic protection

Protection against minor friction.

Anti-dust protection.

USE

Kit with 30ml, 50ml or 100ml vial, microfibers wax and an applicator.

PREPARE the surface before the treatment (washing, decontamination and ideally a finition polish).

DEGREASING mandatory and meticulous with Paddock.

POUR a line of product over the microfiber wax 10x10cm wrapped around the applicator.

SPREAD over an area of 60x60cm by first detonating the edges. 

APPLY in straight cross motions (criss-cross).

LET stand between 1min and 2min depending on the temperature condition

WIPE with a double-sided microfiber and then with a 40x40cm microfiber wax.

Second layer 2h after.

KEEP the vehicle dry at least 12 hours.

PRO TIPS : 

Be sure to be well lit before applying the ceramic. 

Wear a mask and protection gloves.

Work in a ventilated environment without surrounding dust.

Avoid contact with moisture during the application.

RECOMMENDATIONS

Dangereux. Respecter les précautions d'emploi. 

Specific References

You might also like