CAR LIFT MARINE

€169.20
Tax included
7234016

Ceramic treatment for SiO2 gel coat. 

Volume
Quantity

CHARACTERISTICS

Ceramic treatment for SIO2 gel coat.

The Car Lift range has been made to offer to the user all the know-how of Fictech in terms of technology with the aim of offering products that are easy to install with a spectacular and very durable result.

Car Lift Marine is the first ceramic of the motorcycle range. By opting for Car Lift Marine, you choose a very long-lasting protection. Car lift Marine is a ceramic protection specially for boats with a Gell coat shell, or a varnished wooden shell.

Protects against UV rays and oxidation. 

With Car lift Marine, the maintenance of the boat will become much faster and easier. The very high resistance to traces of water and salt.

It will always be possible (and we recommend) to apply 2 layers of Car Lift motorbike on your varnish for more protection and shine.

A ceramic protection of this quality will require a careful preparation of the support (pre-washing, washing, decontamination, polishing and especially degreasing).

Careful wiping in a well-lit room will be required to avoid any residual trace that would be difficult to make up once the treatment has dried. 

Car lift Marine requires some precautions of use but you will ensure the best of the existing protections (ceramic), with a great ease of maintenance.  

Application possible on all varnished parts of your boat.

Protection 1 season

Hydrophobic protection

Protection against minor friction

Anti-fouling protection

Anti-UV

Anti-salt

USE

Kit with 100ml vial, microfibers wax and an applicator.

PREPARE the surface before the treatment (washing, decontamination and ideally a finition polish). Use the nautical range. 

DEGREASING mandatory and meticulous with Paddock.

POUR a line of product over the microfiber wax 10x10cm wrapped around the applicator.

SPREAD over an area of 60x60cm by first detonating the edges. 

APPLY in straight cross motions (criss-cross).

LET stand between 1min and 2min depending on the temperature condition

WIPE with a double-sided microfiber and then with a 40x40cm microfiber wax.

Second layer 2h after.

KEEP the boat dry at least 12 hours.

PRO TIPS : 

Be sure to be well lit before applying the ceramic. 

Wear a mask and protection gloves.

Work in a ventilated environment without surrounding dust.

Avoid contact with moisture during the application.

RECOMMENDATIONS

Dangereux. Respecter les précautions d'emploi. 

Specific References