GLIDE

€12.00
Tax included
7230016

Lubricant for clay bars. 

Volume
Quantity

CHARACTERISTICS

Lubricant for clays

Lubricant for clays (cleaning bars) for decontamination step. To proceed with the decontamination step, it is necessary to have a clay (clay bar) and a quality clay lubricant.

Glide will be used to create this lubricant film necessary to use your clay. The composition of Glide is very loaded with lubrificating agents to minimize the risk of creating very fine surface defects when passing clay (clay marring). The formulation will also allow to envelop the various contaminants harvested (light tar, grease veil embedded, various polluting fallout).

The smell of Glide is very pleasant, which will also contribute to decontaminate its car. 
Glide can be used on bodywork, rims, raw plastics, fires, glass. Absolutely avoid the use of clay and so of glide on raw plastics and rubbery surfaces.

USE

WASH and dry the vehicle.

SHAKE the bottle before its use.

OPERATES AWAY from the sun. 

SPRAY directly on the surface and on CLAY.

LUBRICATE enormously to avoid damaging your CLAY and scratching the paint. 

APPLY clay gum (CLAY) by crossing your movements.

WIPE with a microfiber. 

PRO TIPS: Never apply Glide under full sun. Do not hesitate to apply GLIDE generously in order to create a sufficient film.

RECOMMENDATIONS

Dangereux. Respecter les précautions d'emploi. 

H302 Nocif en cas d'ingestion. 

H317 Peut provoquer une allergie cutanée.

Specific References

You might also like