CUT- Polish STEP 1
  • CUT- Polish STEP 1



Polish hyper abrasive compound, step 1.



Polish hyper abrasive compound, step 1.

Hard polish (compound type) allowing the correction of depth default.

Step 1- Cut will be the polish to use for the correction of really depth default (white scratch, severe oxidation). Its very abrasive grain based on quartz and titanium will allow to rise from sanding in 1500 to water.

It is recommended to use Step 1- cut  with a very abrasive and hard pad (foam pad) or ideally with a microfiber pad or wool pad.
Can be used in a rotary or orbital machine.

This polish has been made for all types of paints, varnishes or shiny. It will also be useful to correct plastics parts (for example door post) or polycarbonate lights.

Use as a least resort if Step 2 - Scratch doesn't produce any probative effect.

The finish level of Step 1 Cut is remarkable for a compound. However, it will be highly recommended to use the other steps (Step 2/ Step 3) on delicate paints or finishes (black varnishes, lacquers etc).

Formulation without any filler or silicone. 


WASH and dry your vehicle.

SHAKE before its use.

OPERATE away from the sun.

APPLY a little quantity of product on the PAD.


PAD sheepskin / White pad.

SPEED 1000-1300tr/min

PRO TIPS: Always avoid working a polish on hot surfaces and/or in full sun.


Dangereux. Respecter les précautions d'emploi. 

H302 Nocif en cas d'ingestion. 

H317 Peut provoquer une allergie cutanée.

Specific References


Fiche technique CUT FR

Download (1.31M)

You might also like

chat Comments (0)
No customer reviews for the moment.